|

Feel
free to download Heatshield's newest catalog right
here. Adobe
Acrobat Reader is required.

COLORED
SLEEVING - Rated to 1200° F continous. Extreme Temperature
Insulating Wrap. Protect wires, fuel lines, and more continuously
with up to 1200° F of protection and enhance the look
and performance of your vehicle.
Add cool
protection to your hot rod, race or custom car. Their colored
sleeving is an excellent way to protect wires, fuel lines,
brake lines, and more while enhancing your vehicle's appearance.
This special weaving of the sleeve allows it to expand over
fittings when installed and return to its original size. Colored
sleeve coatings make it capable of withstanding 1200°
F continuous. Rolls are in 25' length and have an adjustable
inside diameter from 1/4" to 7/16". Fasten using
Thermal-Tie or hose clamps.
REFLECT-A-SLEEVE
- Rated to 1100° F continous. Reflective Wire Sleeving.
Aluminized high-temperature fabric sleeving designed to keep
wires and cables safe from 1100° F continuous radiant
heat.
Reflect-A-Sleeve
acts as a thermal barrier capable of reflecting away over
90% of radiant heat from your wiring, lines and cables. What's
more, a 3" length of their Reflect-A-Sleeve weighs less
than 6" of te old silicone covered stuff! Even though
it weighs much les, it offers superior heat protection. Available
ina solid or hook and loop seem. Reflect-A-Sleeve withstands
100° F continuous of radiant heat and 500° F direct
heat.

THERMAL
SLEEVING - Rated to 1100° F continous. High Temperature
Radiant Heat Mat. Specially woven glass fabric sleeving designed
to keep wires and cables safe from 1100° F continuous
radiant heat.
An excellent
way to protect wires, fuel lines, brake lines, battery cables,
EGR Tubes, and more. The special weave of the sleeving allows
it to expand over plugs and fittings when installing. Capable
of withstanding 1100° F continuous heat, this sleeving
is ideal for protecting components that are very close to
exhaust systems. Thermal sleeving reduces radiant heat transfer
and also dissipates heat. Fasten using Thermal-Tie, Cool Foil
Tape or hose clamp. Available in bulk.
RED
HOT SLEEVING - Rated to 450° F continous. Silicone
Coated Heat Sleeving. Original silicone coated sleeving for
protecting wires, cables and brake lines against heat, grease,
water and petroleum products.
This
old track favorite started it all over 20 years ago. This
sleeving has a red-oxide or black silicone covering, so fraying
is reduces to a minimum. This silicone covering makes it easier
to clean than other types of sleeving. Excellent for brake
lines, wires, cables, etc. Material is non-combustible and
resists water, fungus, and petroleum products. The silicone
covering is great for preventing fraying, making it easy to
clean while protecting the desired components. Withstands
heat up to 450° F continuous.
THERMAL
HOSE SLEEVING - Rated to 1200° F continous. Specialty
Coated Hose Sleeving. Protects rubber hoses from radiant heat
damage, and increases their useful life. Specially coats to
reflect and dissipate heat.
Protects
rubber hoses from radiant heat damage, increasing their life.
Used to insulate air intake tubes from radiant heat lowering
your intake temperatures and increasing horsepower. Special
coating allows this sleeving to reflect and dissipate heat.
This special braid of sleeving allows it to have an expandable
inside diameter from 1 3/4" to 2 3/8". Thermal Hose
Sleeving is capable of withstanding 1200° F continuous.
It mane be fastened using Thermal-Tie or hose clamps.
CFT
COOL FOIL TAPE - Rated to 1000° F continous. Lightweight
Insulating Tape. Heat resistant tape used to secure and protect
wires, lines and cables and finishes off edges of thermal
insulation to prevent fraying.
This
light weight insulating tape reflects heat away from wires,
lines cables and more. This tape is an excellent way to insulate
components without disassembly, or use it as a means to finish
off other forms of thermal insulation to prevent fraying.
This economical alternative to toher forms of heat protection
cuts easily and has a self-adhesive backing. CFT withstands
1000° F continuous of radiant heat and up to 400°
F of direct contact.

Don't
get burned by the competition..Run Cool, Stay Cool
Here
are some cool Bishop links...

Have
any questions about parts, kits, or products available from
Bishop are welcome. Contact the us by phone and leave a message
at 604-984-3673 or e-mail by visiting our contact page and
we will respond promptly. Our office hours are Monday to Friday
from 10:00am to 4:00pm PST. We really love to share the fun
with other performance enthusiasts who want to take their
cars to the next level of performance, appearance and handling!
Thanks for visiting!
Complete suppliers of automotive superchargers,
custom, racing and performance parts!
Home
| Contact | Back
| Top
|