|
H&R 2.50" I.D. Race Springs
H&R
2.50” I.D. Race Springs are made with extremely high
tensile strength wire alloy which allows the use of a thinner
wire thickness. Manufactured using advanced materials and
technology, H&R 2.50" I.D. Race Springs are crafted
from special 54SiCr6 spring steel and, for any given spring
rate, are on average 15% lighter and have 10% more travel
than competitors springs. Main springs range from 6"
to 16" in length and are available in a wide selection
of spring rates.
TENDER
SPRINGS
H&R's 2.50" I.D. Tender Springs are made of trapezoidal
(flat rather than round) spring wire and have a low block
height for maximum travel. These springs are designed for
demanding motorsport environments, and like all H&R springs,
have been pre-blocked at the factory so they will never take
a set or sag.
H&R
60mm I.D. Race Springs
H&R
60mm I.D. Race Springs are crafted from special 54SiCr6 spring
steel and are one of the most comprehensive line of race springs
in the U.S. With hundreds of main springs and tender springs
available, H&R has the lengths and rates necessary for
optimal tuning and setup.
The H&R
complete line of 60mm I.D. main and tender springs includes
main springs ranging from 100 mm to 300 mm (25.4 mm = 1 inch)
in length and 30 N to 700 N (N / mm x 5.709 = pounds / inch)
in spring rate. Tender springs vary in length from 40 mm to
130 mm, with many spring rates available.
TENDER
SPRINGS
H&R 60mm I.D. Tender Springs are made of trapezoidal (flat
rather than round) spring wire for a low block height and
maximum travel. These springs are designed for demanding motorsport
environments, and, like all H&R springs, have been pre-blocked
at the factory so they will never take a set or sag. Also
available are H&R inside and outside locating spring retainers.
Any
questions about kits, parts, installations or services are
welcome. Contact Bishop by phone at 866-867-8324 or
e-mail bishop@bishopsales.com
and we will respond promptly. If you're in the neighborhood,
then drop by the shop at 1130 West 15th Street North Vancouver
BC and we will gladly give you a tour of our facilities, but
beware – there may be a Monster and ferocious horsepower
beasts in our shop when you visit! We really love to share
the fun with other performance enthusiasts who want to take
their cars to the next level of performance, appearance and
handling!
Home
| Contact | About
| Store | Lines
| Links | Back
| Top
|
H&R
RACE SPRINGS 
