At Pfadt, Their minds are always racing.

They have developed adjustable Coil Over kits and a uniquely engineered Corvette Sway Bar kit to give you control through the curves. Our suspension packages for your C5 or C6 Corvette deliver Race Durability and Street Performance.

Their philosophy is simple: start with something great and make it better. The C5 and C6 Corvettes are fabulous not only on the street, but also on the track. They know that not every Corvette owner is looking for the same experience from their car so our products are designed to offer the ultimate in adjustability and performance.

Aaron Pfadt is the the guy behind their products. A mechanical engineer by training and racer at heart, Aaron's vision for Pfadt Race Engineering is to create products that enhance a driver's enjoyment of their car - it all goes back to starting with something great and making it better.

If you're ever passing through Utah, stop by and visit them! Their main location is in Salt Lake City and they have a shop at the new Larry Miller Motorsports Park in Tooele.

Bishop Sales uses Pfadt Suspension components on the Z06 Corvette Race car! It works!

C5 Adjustable Coil Over Kit
COA.C5

We'd like to dispel the myth that coil overs are only for racing! These coils are engineered for exceptional street driving and track performance. Unlike some coil overs, ours allow you to adjust ride height independent of spring pre-load so you don't have to compromise ride quality for ride height. Our coil overs also feature a compression and rebound dampening adjustment that can be tuned while the suspension is on the car.

The shocks are a Monotube design for simplicity and durability and are fully rebuildable. Each mounting cup is made of machined aluminum for superior strength and reduced weight.

• Monotube design for durability
  
• Standard 2 1/4 inch diameter springs
  
• Complete bolt-on kit
  
• Fully rebuildable
  
• Adjustable length body allows maximum ride-height flexibility
  
• Internal Dampening knob from1-16 clicks. For all around street and track performance.
  
• If you're a Track Star* or a Street Cruiser this is the shock for you!

C5 Adjustable Sway Bar Kit - Street
SBA.C5.STRT

Are you looking for race quality products that don't beat you up on the street? Sway Bars are the easiest way to perfect the handling of your car without sacrificing ride quality and at Pfadt Race Engineering, we've designed our bars to be adjustable in the both front and rear to tune your handling. Our C5 Sway Bars are designed to bolt in for easy installation, and set up to reduce you car's tendency to push in the turns.

Our bars are significantly lighter than both stock and after market bars. Our front bar assembly weighs 9.5 pounds which is 4 pounds lighter than stock!

Each kit includes:

• A hollow, light weight bar for the front and rear, zinc coated for a durable corrosion-resistant finish
• 6061 anodized aluminum arms with multiple adjustment holes
• Steel, Teflon lined spherical end links - all made in the USA.
• Polyurethane bushings for a complete installation
  Multiple adjustment holes for both front and rear
• Don't settle for mere copy of a GM Z51 Bar!
  

C5 Pfatty Bars - Competition Sway Bar Package
SBA.C5.PFAT.KIT

Ready to commit your C5 to the track? These adjustable competition sways are just what you're looking for! Not for the faint of heart, we offer these "fatter" bars to give you nearly T1 stiffness and our trademark adjustability.

We retain the adjustability of our standard bars, but increase the outside diameter of the bar for a much stiffer spring rate. For serious track use, you'll be thrilled with the reduced body roll and stability in the turns.

Features Include:

• Arms are now 7075 Aluminum (lighter and stronger). They will be anodized orange.
• Spline is cut into the bars.
• Arm spline is cut at an angle to eliminate the bend process.
• End link kit is completely designed in house and all made in the USA.
• Front and rear arms each have one additional adjustment hole.

The Pfadt Adjustable Sport Shock is perfect for autocrossers and street enthusiasts!

In terms of features, these shocks give up nothing to the competitive shocks on the market! These shocks set the new standard for an adjustable sport shock. They are great as a stock shock replacement and a hardcore track shock and everything in between.

If you’re not ready to to make the change to coil-overs, or if your racing class won’t allow them, our Pfadt Sport Shocks are what you need! We’ve taken our proven, proprietary damping technology and applied it to our new adjustable shock.

Our Sport Shocks feature:

• Inverted body for low unsprung mass
• 16 points of adjustment with the knob right at the bottom for easy on car adjustments without using any tools
  
• Our single point damping adjustment gives control of both compression and rebound damping
  
• These shocks can be ‘turned up’ for track or autocross use, and ‘turned down’ for street use.
  
• Compared to the Koni 3013 Sport, Pfadt features a lower spherical bearing mount in the front rather than a soft bushing
  
• Front lower spherical mount eliminates rubber bushings and provides superior durability
  
• Shortened body allows for lowering your car without fear of bottoming out the shock
  
• Pfadt Race Engineering proprietary damping and design specifically for the Corvette
  
• Easy, bolt on installation

Any questions about kits, parts, installations or services are welcome. Contact Bishop by phone at  866-867-8324 or e-mail bishop@bishopsales.com and we will respond promptly. If you're in the neighborhood, then drop by the shop at 1130 West 15th Street North Vancouver BC and we will gladly give you a tour of our facilities, but beware – there may be a Monster and ferocious horsepower beasts in our shop when you visit! We really love to share the fun with other performance enthusiasts who want to take their cars to the next level of performance, appearance and handling!

Home | Contact | About | Store | Lines | Links | Back | Top