|
VORTECH
MARINE FLAME ARRESTORS
This
rugged, ultra high flow flame arrestor is machined from T-6061
T6 billet aluminum. It comes show polished adding a custom
hi-tech look to any engine bay. Featuring a form fit, washable
and reusable air filtering element that flows an impressive
35% more air than a stock MPI flame arrestor. This dyno-tested
piece can add 4-11 more horsepower to your stock 454/502 MPI
engine.
The Vortech
Marine Maxflow Flame Arrestor is a must for boats equipped
with MPI Magnum engines using modified exhaust systems.
The Vortech
Marine Maxflow Flame Arrestor comes complete with inner and
outer billet mounting plates, four billet mounting stands,
filter element and stainless mounting hardware. This unit
installs in minutes and is tested to USCG J-1982 SAE standards.
APPLICATIONS
Part#
4MA112-058
454/502 EFI Magnum Flame Arrestor with Vortech Logo
Part#
4MA112-068
454/502 EFI Magnum Flame Arrestor without Vortech Logo
Part#
4MA112-108
HP500 EFI Flame Arrestor with Vortech Logo
Part#
4MA112-118
HP500 EFI Flame Arrestor without Vortech Logo
VORTECH
MARINE FUEL OPTIMIZERS
This piece allows adjustment and precise fine tuning of the
454/502 MPI fuel injection system, which is currently non-adjustable.
Why is
this important? When airflow through an engine is changed,
the air-fuel ratio changes generally causing a lean condition
(an example of this is when a modified exhaust system is installed).
If the engine were carbureted a simple jet change would take
care of any tuning issues. With the 454/502 MPI fuel injected
Mercury Magnum engine there is no provision for fuel adjustment.
Now, with the new Vortech Marine Fuel Optimizer fuel adjustment
is possible.
The Vortech
Marine Maxflow Fuel Optimizer is precision machined from T6061
T6 aluminum and anodized in corrosion resistant blue. This
piece is detailed with the Vortech Marine logo laser engraved
on the side. The Maxflow Fuel Optimizer attaches to the stock
fuel pressure regulator (modification to the stock pressure
regulator is required), allowing easy adjustment from 25-70
psig.
The Maxflow
Fuel Optimizer comes with a new housing, retaining clip, spring,
O-ring, brass adjustment screw, stainless jam nut, stainless
mounting hardware and installation and tuning instructions.
Installation should be performed by someone with a good working
knowledge of Mercury MPI fuel injection system.
FUEL
OPTIMIZER APPLICATIONS
Part#
8F130-013
Blue Fuel Pressure Optimizer
Part#
8F130-015
Red Fuel Pressure Optimizer
Part#
8F130-017
Purple Fuel Pressure Optimizer
Part#
8F130-018
Polished Fuel Pressure Optimizer
Any
questions about kits, parts, installations or services are
welcome. Contact Bishop by phone at 866-867-8324 or
e-mail bishop@bishopsales.com
and we will respond promptly. If you're in the neighborhood,
then drop by the shop at 1130 West 15th Street North Vancouver
BC and we will gladly give you a tour of our facilities, but
beware – there may be a Monster and ferocious horsepower
beasts in our shop when you visit! We really love to share
the fun with other performance enthusiasts who want to take
their cars to the next level of performance, appearance and
handling!
Home
| Contact | About
| Store | Lines
| Links | Back
| Top
|
VORTECH
MARINE SUPERCHARGERS
