|


VORTECH
MARINE SUPERCHARGER KITS
HP500
EFI Supercharging System
Power
Available:
- 700
HP @ 5400 RPM on 91 octane pump gasoline
- 716
lb./ft. @ 4400 RPM on 91 octane pump gasoline
- Higher
horsepower applications are also available
Features:
- The
reliable and complete HP500 EFI supercharger system
- Reprogrammed
ECM for supercharged operation
- Rev-limiter
set @ 5700 RPM
- Retains
stock cooling system and proper cold start cycle
- Fully
serviceable aftercooler
- Pressurized
supercharger oiling for the long fear and bearing life
- Precision
high-speed bearings
- OEM
fit and finish
- All
engine accessories retain stock locations
- Cast
aluminum discharge ducts and Purosil silicone discharge
hose connections
- Billet
anodized mounting brackets
- Aluminum
Flame Arrestor housing with washable, reusable element
- Fits
serpentine drives as well as three V-accessory engines
- Installation
Manual: HP 500
APPLICATIONS
Part#
4MB218-010
1998-2002 HP500 EFI Supercharging System - Satin Finish
Part#
4MB218-018
1998-2002 HP500 EFI Supercharging System - Polished Finish
Part#
8F001-550
HP500 EFI Fuel Pump
Part#
8F102-002
HP500 EFI Fuel Filter with stainless steel element
Part#
8F160-050
HP500 EFI High-flow Fuel Injectors (set of 8)
Part#
8F130-040
HP500 EFI Fuel Pressure Regulator
Mercury
454/502 Magnum Supercharging System
Power
Available:
- 570
HP Base System with stock engine and stock fuel system
- 620
HP System System with modifications to fuel system
- 720
HP System with modified engine and fuel system
Features:
- Programmed
ECM and MAP sensor allow for boosted operation plus fuel
curve/ignition timing management
- Integrated
high-flow, billet and cast aluminum flame arrestor
- Dual
pass, air-to-water aftercooler that allows additional horsepower
gains and is fully serviceable (a Vortech exclusive)
- Exclusive
high-efficiency bypass valve provides quiet, surge-free
compressor operation (MPI System)
- Retains
all stock thermostat components which allows for fuel system
efficiency and economy
- 6061
T-6 billet aluminum (anodized) mounting brackets and drive
pulleys for durability and reduced weight
- OEM-type
cast aluminum discharge ducting and heat resistant silicon
sleeves for dependability
- Polished
finish supercharger and ducting available
APPLICATIONS
Part#
4MA218-070
1998-2002 Mercury 454/502 Magnum
Supercharging System - Satin Finish
Part#
4MA218-078
1998-2002 Mercury 454/502 Magnum
Supercharging System - Polished Finish
Part#
4MA218-080
1993-1998 Mercury 454/502 Magnum
Supercharging System - Satin Finish
Part#
Call
1993-1998 Mercury 454/502 Magnum
Supercharging System - Polished Finish

Carbureted
Supercharging System
Power
Available: 500 - 1,100 HP depending on application
Features:
- Carburetor
enclosure with linkage for Demon or Holley units
- Modular
mounting system will accept any Vortech supercharger (not
included)
- Adaptable
to tall or short deck engines
- Serpentine
or cog drive configuration is available
- 6061
T-6 billet aluminum (anodized) mounting brackets and drive
pulleys for durability and reduced weight
- OEM-type
cast aluminum discharge ducting and heat resistant silicon
sleeves for dependability
- Polished
finish supercharger and ducting available
- Fits
Mercruiser IOs and jet boats
APPLICATIONS
Part#
3GA218-010
Mercury/Jet Big Block Carbureted Supercharging System - Satin
Finish
Part#
3GA218-018
Mercury/Jet Big Block Carbureted Supercharging System - Polished
Finish
Any
questions about kits, parts, installations or services are
welcome. Contact Bishop by phone at 866-867-8324 or
e-mail bishop@bishopsales.com
and we will respond promptly. If you're in the neighborhood,
then drop by the shop at 1130 West 15th Street North Vancouver
BC and we will gladly give you a tour of our facilities, but
beware there may be a Monster and ferocious horsepower
beasts in our shop when you visit! We really love to share
the fun with other performance enthusiasts who want to take
their cars to the next level of performance, appearance and
handling!
Home
| Contact | About
| Store | Lines
| Links | Back
| Top
|