<< Back to Perfomance Basics..

Kenny Brown Brake Ducts...

The Club Sport Brake Cooling Kit is designed to improve the braking efficiency by cooling the front calipers and rotors for increased clamping force, better overall feel, and modulation. The ClubSportä Brake Cooling Kit gives you an added edge in all performance driving situations and provides confident, fade-free stopping in open-track and racing applications.
 
Carefully read through these instructions before beginning. If you do not understand or feel comfortable with these procedures, have a qualified mechanic perform the installation.
 
Note: Kenny Brown recommends using high-performance DOT approved or competition braided steel brake lines in all high-performance applications.
 
Installation Time: Approximately 1 hour
 
Tools Needed:
Shop Manual
Floor Jack
Jack Stands
Ratchet
15mm Socket
12mm Socket
 
Kit Includes:
(2) Brake Ducts
(6) Bolts
(6) Spacers
 
Installation:
 
1. Raise the front of the car and support with jack stands. (Never support car with floor jack! Always use proper weight rated jack stands to support car!)

2. Remove tires

3. Starting on the Driver Side, use a 15mm Socket to remove the two bolts that secure the brake caliper to the spindle. Leave the brake caliper attached to the brake line and secure the caliper out of the way. Make sure there is no stress on the brake line to prevent puncturing or failure.

4. Remove the brake rotor.

5. Using a 12mm Socket, remove the three bolts that secure the factory dust shields. Remove the dust shields; they will no longer be needed.

6. Place the Drivers Side Kenny Brown Brake Duct up to the spindle with the scoop toward the front side of the spindle.  Secure the Kenny Brown Brake Duct to the spindle using the holes where the dust shields were bolted in, with three of the provided bolts and spacers. The spacers will go in between the spindle and the brake duct.

7. Reinstall the brake rotor.

8. Reinstall the brake caliper and torque the mounting bolts to factory specs.

9. Repeat steps 3 through 8 on the passenger side.

10.  Replace the tires and torque the lugs to factory specs.

11.  Safely remove the jack stands and lower the vehicle.

Any questions about kits, parts, installations or services are welcome. Contact Bishop by phone at  866-867-8324 or e-mail bishop@bishopsales.com and we will respond promptly. If you're in the neighborhood, then drop by the shop at 1130 West 15th Street North Vancouver BC and we will gladly give you a tour of our facilities, but beware – there may be a Monster and ferocious horsepower beasts in our shop when you visit! We really love to share the fun with other performance enthusiasts who want to take their cars to the next level of performance, appearance and handling!

Contact | About | Store | Back | Page Top | Lines | Links